Search
Filters
Close

TD-1

Model TD- 01 Tap Density Tester is microprocessor-controlled and complies with USP and ASTM specifications. This apparatus offers a simple and standard means of measuring the tapped density of powders, granules, pellets, etc. It supports USP-I method of testing. The test may also be performed as per ASTM standards using the optional adapter for cylinder holders. The cylinder holder with snap-lock mechanism are designed to hold the 100ml. (Smaller sizes also available)
SKU: 0401A00181
GTIN: 0401A00181
Call for pricing

Model TD- 01 Tap Density Tester is microprocessor-controlled and complies with USP and ASTM specifications. This apparatus offers a simple and standard means of measuring the tapped density of powders, granules, pellets, etc. It supports USP-I method of testing. The test may also be performed as per ASTM standards using the optional adapter for cylinder holders. The cylinder holder with snap-lock mechanism are designed to hold the 100ml. (Smaller sizes also available) FEATURES:

1. Supports USP I method

2. Unique rotating & tapping motion for even packed surface

 3. Acoustic cabinet to minimize noise level [Optional] 4. 24 x 2 characters back lighted LCD display

5 .Documented printout of test results and validation data

6. Calculation of standard parameters like % Tapped Density, Compressibility Index,Hausner ratio, etc.

7. Computer interface through RS 232 8. Supports 100 ml cylinder. Other cylinder size also available

SPECIFICATIONS: USP I No. of Stations 1 Stroke Height 3 mm + 10% Strokes/Minute 250 Drive: Stepper motor drive for each station Printer Interface: Centronics parallel port.

(Optional Item) Printers Supported: 80 column dot matrix, HP DeskJet, HP LaserJet Epson LX300 Computer Interface: RS-232 communication port

 optional. Power Supply: 110V AC / 60 Hz OR 230V 50 Hz Dimensions: 360mm L x 320mm W x 200mm H (without cylinders). Gross

Model TD- 01 Tap Density Tester is microprocessor-controlled and complies with USP and ASTM specifications. This apparatus offers a simple and standard means of measuring the tapped density of powders, granules, pellets, etc. It supports USP-I method of testing. The test may also be performed as per ASTM standards using the optional adapter for cylinder holders. The cylinder holder with snap-lock mechanism are designed to hold the 100ml. (Smaller sizes also available) FEATURES:

1. Supports USP I method

2. Unique rotating & tapping motion for even packed surface

 3. Acoustic cabinet to minimize noise level [Optional] 4. 24 x 2 characters back lighted LCD display

5 .Documented printout of test results and validation data

6. Calculation of standard parameters like % Tapped Density, Compressibility Index,Hausner ratio, etc.

7. Computer interface through RS 232 8. Supports 100 ml cylinder. Other cylinder size also available

SPECIFICATIONS: USP I No. of Stations 1 Stroke Height 3 mm + 10% Strokes/Minute 250 Drive: Stepper motor drive for each station Printer Interface: Centronics parallel port.

(Optional Item) Printers Supported: 80 column dot matrix, HP DeskJet, HP LaserJet Epson LX300 Computer Interface: RS-232 communication port

 optional. Power Supply: 110V AC / 60 Hz OR 230V 50 Hz Dimensions: 360mm L x 320mm W x 200mm H (without cylinders). Gross