Close
Search
Filters

5 Parameter Tablet Tester (EHT-5P)

Products specifications
Model EHT-5P
Parameters Weight, thickness, Diameter/Length, Width and Hardness
cGMP compliance Body can be Stainless Steel (SS) to comply with cGMP regulations or painted MS
Display 7" full color
Samples per test up to 1000
Adjustable delay between the samples 1 to 99 sec
Measuring Principle Constant speed or constant force selectable
Printing for data and graphs selectable User selectable templates
Hardness Range 3 to 800 N
Accuracy 1N
Jaw opening 40 mm (up to 65 mm optional)
Units for hardness N, Kp, Sc, user defined
Units for thickness mm/inch
Constant speed setting 0.5 mm to 3 mm in step of 0.1 mm
Constant force setting 10 kg to 100 kg/sec force in step of 1 kg/sec
Weight External balance connectivity Sartorius/Mettler/Shimadzu/Contech
Jaw opening 40 mm (up to 65 mm optional)
Tilt sensing device Yes
External thickness Optional
Security 3 level user management (flexible role)
Hardness/Thickness calibration 2 point calibration 3 point verification linearity
Report format User selectable tablar format
Interface LAN, USB and serial
Embedded printer No
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
5 Parameter Tablet Tester (EHT-5P)

5 Parameter Tablet Tester (EHT-5P)

Products specifications
Model EHT-5P
Parameters Weight, thickness, Diameter/Length, Width and Hardness
cGMP compliance Body can be Stainless Steel (SS) to comply with cGMP regulations or painted MS
Display 7" full color
Samples per test up to 1000
Adjustable delay between the samples 1 to 99 sec
Measuring Principle Constant speed or constant force selectable
Printing for data and graphs selectable User selectable templates
Hardness Range 3 to 800 N
Accuracy 1N
Jaw opening 40 mm (up to 65 mm optional)
Units for hardness N, Kp, Sc, user defined
Units for thickness mm/inch
Constant speed setting 0.5 mm to 3 mm in step of 0.1 mm
Constant force setting 10 kg to 100 kg/sec force in step of 1 kg/sec
Weight External balance connectivity Sartorius/Mettler/Shimadzu/Contech
Jaw opening 40 mm (up to 65 mm optional)
Tilt sensing device Yes
External thickness Optional
Security 3 level user management (flexible role)
Hardness/Thickness calibration 2 point calibration 3 point verification linearity
Report format User selectable tablar format
Interface LAN, USB and serial
Embedded printer No
google-site-verification: google52d813646b53dbf4.html